Archie - Small Composite Driveway Gate
Archie - Small Composite Driveway Gate - Image 2
Archie - Small Composite Driveway Gate - Image 3

Archie – Small Composite Driveway Gate

£2,510.00

Fully boarded, bowed top, screwless framed composite driveway gate

Options Total: £ 0

Select the upper price bracket below. Enter your exact sizes below. We will issue CADS for your approval.

Gate Width Price Options*
Actual Gate Width (mm)

*
Actual Gate height (mm)

Measure from ground level to the top of gate

*

Select the tall option for this design if height is greater than 1250mm

Composite Board Colour*
Gate Finish*
Gate Finish*
Gate Finish*
Gate Finish*
Gate Finish*
Gate Finish*
Gate Finish*
Powder Coating Colour

*
*
*
*
*
*
*

Looking for a different colour? Contact us

Hinge Options
Manual - Automated*

**Automation not included

Gate Opening Direction

Which way will the gate open? If you were standing outside/street side

*
Gate Support

Posts - galvanised & powder coated (same as gate frame).


Total Price: £ 2510

Category:

The ‘Archie’ composite gate offers a modern twist on the traditional composite gate build with an ach top. No screws on show at the front of the driveway gate, with all composite boards sitting behind a steel frame. Fully boarded, bowed top, screwless framed composite driveway gate

 

This product is constructed from a premium-quality 50mm steel frame box section engineered for enhanced durability and structural integrity. The frame can undergo galvanisation and/or powder coating to provide superior protection against environmental factors. The gate features an infill composed of eco-friendly, recycled timber and plastic, positioning it as a leading solution in the category of maintenance-free composite driveway gates.

 

Please view our how to measure page to ensure you purchase the correct size gate.

Brand

Welded Gate
MPN

WGARCSM

Frame Specification

This product is constructed from a premium-quality 50mm steel frame box section engineered for enhanced durability and structural integrity. The frame can undergo galvanisation and/or powder coating to provide superior protection against environmental factors. The gate features an infill composed of eco-friendly, recycled timber and plastic, positioning it as a leading solution in the category of maintenance-free composite driveway gates.

Frame Specification

– Material: Mild Steel

– Box Section: 50 x 50 x 2.5 mm mild steel hollow box section (SHS)

– Internal Frame (if applicable): Steel angle

– Gate Arch (if applicable): 50 mm x 50 mm mild steel hollow box section (SHS)

– Country of Origin: 100% bespoke manufacturing within the UK, utilising British steel

– Treatment: Galvanized (optional)

– Finish: Powder-coated (optional)

Coating

Galvanizing Defined

Galvanisation is a process of applying a protective zinc coating to steel to inhibit rust formation. Hot-dip galvanisation, in particular, offers substantial longevity, providing protection for up to 50 years in rural environments and around 25 years in more corrosive settings, as advised by galvanising professionals. Unprotected steel exposed to environmental conditions is susceptible to rust; the corrosion rate will depend on specific local environmental factors.

 

Powder Coating Defined

Powder coating involves an electrostatic application of powdered paint, which is subsequently polymerised under heat to form a durable coating. This method can extend the lifespan of the paint finish up to a decade; however, manual paint application may require more frequent maintenance due to potential flaking. While powder coating offers a layer of protection against rust, its effectiveness does not match that of hot-dip galvanisation.

 

Galvanisation and Powder Coating

It is feasible to apply both galvanisation and powder coating processes to the gate, which would enhance its durability and aesthetic appeal.

Infill

Infill Specification

The infill comprises tongue-and-groove composite boards made from eco-friendly, recycled timber and plastic. A range of colours and finishes is available, ensuring aesthetic versatility. The composite boards exhibit vibrancy, resilience and impervious to rot or to warp, and no pre-installation staining, treating or painting.

Cost Compare

Market Price Considerations

End users must comprehend the variances in gate pricing, particularly in the absence of industry expertise.

 

Structural Integrity: Our gates utilize a 50 x 50 mm box section; in contrast, numerous competitors produce gates from a smaller 30 x 30 mm box section. This fundamental difference greatly influences the strength and sturdiness of the gate.

Finish Treatment: Many metal gates lack galvanisation, which can significantly reduce costs. In contrast, we prioritise galvanization. We acknowledge that gates will need fettling, due to the rough texture left after being galvanised.

Finish Quality: Competitors often omit the labour-intensive process of fettling a gate for cost-cutting purposes.

Welding Quality: The quality of welds constitutes another primary distinction. Our methodology incorporates mitered corners (cut at 45 degrees), a technique not universally employed by other manufacturers, resulting in our welded gates having a superior finish.

Related products

Shopping Cart